Main switchboard (MS) are used in the assembly of the CPS KTP 6 (10 kV) / 0,4 kV (low-voltage component), input devices at industrial sites, in administrative and residential buildings to provide protection from overloads and short-circuits, power metering, and infrequent operational switching of electrical circuits.
MS can have one or two inputs, as well as additional input from the diesel generator. Metal switchboards with single or multiple sections for single-sided or double-sided maintenance are available. Each section can be fitted with protective panels (shields) and doors. Multi-section switchboards are easily assembled and disassembled as required for transportation. Switchboards have cable or busbars inputs. Inputs can be either from above or from below. Output can be both through the sections where the devices are installed and through dedicated sections, which is especially convenient for unilateral maintenance. Power busbars are made of a calibrated copper strip.
Rated current, In |
from 400 to 3200 A |
---|---|
Shock current, Ikp | up to 120 kA |
Nominal three-phase voltage, Un | 380 V |
Insulation voltage, Ui | 1000 V |
Rated frequency, f | 50 Hz |
Degree of protection | IP31 or IP54 |
Dimensions of a single section (height × width × depth), mm | 1800-2200 × 600-1200 × 600-1000 |
Climatic version | UHL4 |
Design option | Only floor-mounted version |