Self-Regulating Heating Cable CTE

−60°C
+100°C

Features

  • 80 W/m
  • Self-regulating, automatically adjusts power output in response to ambient temperature
  • Thermoplastic overjacket
Product Datasheet

Application Areas

Temperature maintenance or freeze protection of pipelines and vessels in non-hazardous and ex-hazardous areas

Approvals

CTE is an industrial-grade self-regulating heating cable used to prevent formation of ice and accumulation of snow on outdoor industrial sites (open pump sites, ramps, helipads).

Due to its self-regulating characteristics it will not overheat even when the cable is overlapped. This guarantees maximum safety and reliability.

The installation of CTE heating cable is quick and simple and requires no special skills or tools.

Because of its parallel construction the power output of the heating cable is everywhere the same.

Thus it can be fitted on site to exact piping length without any complicated design calculations.

Can be supplied as pre-fabricated connection-ready sections with cold leads.

  • 80 W/m
  • Self-regulating, automatically adjusts power output in response to ambient temperature
  • Thermoplastic overjacket
  • Easy to install
  • Can be cut to required length on site without any complicated design calculations
  • Will not overheat even when overlapped
  • Full range of accessories available
Technical Data
Rated voltage  230 VAC
Maximum continuous operating temperature (energized)  80 °C
Maximum continuous exposure temperature (de-energized)  100 °C 
Ambient temperature range −60 ... +55 °C
Minimum installation temperature −30 °C
Minimum bending radius 25 mm
Maximum braiding resistance 10 Ohm/km
Conductor cross-section 2.00 mm2
Dimension (СTЕ...BТ) 16.8×7.2 mm
Weight (СTЕ...BТ) 215 kg/km

  1. Nickel-plated copper conductors, 2.00 mm2
  2. Semi-conductive self-regulating matrix
  3. Matrix insulation
  4. Tinned copper braid
  5. Overjacket thermoplastic